+905327637011

    Mix Split Face Travertine 1×2

    Mix Split Face Travertine 1×2

    Our impressive Gold-Silver-Ivory Mix Split Face Travertine 1×2

    Mix Split Face Travertine 1×2 (2,3×4,8 Cover your external facade, walls, or walls in the living room with this unique natural stone product. Indoor and outdoor areas will inspire and convince you. Design a wall behind your fireplace, a splash protection wall in the kitchen, or complete accent walls in the living room, bedroom, hallway, or staircase. These wall stones are also a real eye-catcher as a cladding for your kitchen.

    Nature & sustainability: If you want sustainable, natural, long-lasting, and easy-care wall cladding for living rooms, facades, and garden design, you have come to the right place with our Mix Travertine design facing Split Face. Experience pure nature in the house and garden that is second to none.

    How to Assemble Split Face on a wall?

    Preparation and planning
    Create space: remove all objects and any remaining wallpaper from the wall.
    Use a spirit level to check that the wall surfaces are level.
    Smooth out any imperfections.
    Planning the specific room design: At what height do you want to attach the facing brick, and how much material do you need for this?

    Prepare the wall
    Cover the floor surface with painter’s fleece.
    Attach tape and foil to wall surfaces.
    Attach a support batten to protect the wall facing from slipping until the adhesive has been set.
    Switch off or unscrew fuses if switches or sockets are on the wall surface.
    Prime the wall: Spray primer onto the wall surface and allow it to dry according to the processing instructions on the packaging.

    Mix the glue for natural stone with water (the packaging indicates the mixing ratio).
    Apply the glue evenly to the surface.
    Run a size eight trowel along the wall at a 45-degree angle to estimate the optimal amount.

    Lay Split Face
    Start at an outside corner. Two cornerstones are suitable for this, as they are of different lengths and fit together precisely.
    Apply the glue to the first cornerstone and comb through with the eight tooth comb.
    Place the facing brick at the corner.
    Connect the side overhang of the cornerstone with the adjacent second cornerstone facing the opposite side.
    Place the regular facing bricks next to the cornerstone facing and work up the two sides of the wall in the same way.

    Product Code: KRTS – MXTSF2348

    Material: Travertine
    Type: Mix Travertine Split Face 1×2 (2.3X4.8) mesh mount
    Color: Yellow Gold /Silver / Light Ivory
    Optics: Wall Covering
    Format: Square
    Surface: Split face
    Stone size in mm: 2,3 x 4,8 cm – 1“x 2“
    Dimensional accuracy: Dimensional tolerances (up to + -1.5 mm)
    Weight (per m²):
    Thickness:
    Water Absorption Rate: 2% – 5%
    Installation: Thinset & Grout
    Edge Type: Square
    Stone Origin: Turkey
    Quarry: Sivas / Denizli / Antalya
    Production: Afyonkarahisar

    Stone Origin: Turkey

    Usage Area: Mix Travertine Split Face 1×2 (2.3X4.8) mesh mount

    Wall: yes
    Floor: No
    Frost-proof: yes
    Indoor use: yes
    Outside area: yes
    Wet area: yes
    Antibacterial: Yes
    Scratch-Resistant: Yes
    Break resistance: Yes
    Permanent wet area: No
    Splash water area: Yes
    Easy to Install and maintain: Yes
    Living room
    bedroom
    kitchen
    walls in the living room
    bathroom
    hallway
    indoor and outdoor use.

    Features:

    Durable and hardwearing
    Elegant, unique, and timeless
    High durability and strength
    Environmental friendly